BMR 15-22 S550 Mustang Sway Bar Kit Rear Hollow 22mm Non-Adjustable Red BMR 15-22 S550 Mustang Sway Bar Kit Rear Hollow 22mm Non-Adjustable Red BMR Suspension The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR's suspensions SB762 rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 22mm DOM steel tubing, the SB762 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB762 attaches to your S550 Mustang with polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing.BMR's suspension designed the SB762 sway bar kit for street performance, autocross, and road race applications. The SB762 rear sway bar gives you a 29-41% increase in rate over the stock bar. The rate increase improves the handling characteristics of your S550 Mustang so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB762 attaches to your Mustang with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings, allowing for more sway bar control, which equals better handling. When performance is a must, rely on BMR's suspension!BMR's suspensions SB762 sway bar kit is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!This Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2024 Ford Mustang Dark Horse 2024 Ford Mustang Dark Horse Premium 2015-2024 Ford Mustang EcoBoost 2015-2024 Ford Mustang EcoBoost Premium 2015-2024 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2024 Ford Mustang GT Premium 2022-2023 Ford Mustang Mach 1 2015-2020 Ford Mustang Shelby GT350 2016-2020 Ford Mustang Shelby GT350R 2020-2022 Ford Mustang Shelby GT500 2015-2017 Ford Mustang V6

BMR 15-22 S550 Mustang Sway Bar Kit Rear Hollow 22mm Non-Adjustable Red

Code: BMRSB762R
Add Your Review
BMR 15-22 S550 Mustang Sway Bar Kit Rear Hollow 22mm Non-Adjustable Red BMR 15-22 S550 Mustang Sway Bar Kit Rear Hollow 22mm Non-Adjustable Red
BMR 15-22 S550 Mustang Sway Bar Kit Rear Hollow 22mm Non-Adjustable Red
BMR 15-22 S550 Mustang Sway Bar Kit Rear Hollow 22mm Non-Adjustable Red BMR 15-22 S550 Mustang Sway Bar Kit Rear Hollow 22mm Non-Adjustable Red
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR's suspensions SB762 rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 22mm DOM steel tubing, the SB762 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB762 attaches to your S550 Mustang with polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing.BMR's suspension designed the SB762 sway bar kit for street performance, autocross, and road race applications. The SB762 rear sway bar gives you a 29-41% increase in rate over the stock bar. The rate increase improves the handling characteristics of your S550 Mustang so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB762 attaches to your Mustang with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings, allowing for more sway bar control, which equals better handling. When performance is a must, rely on BMR's suspension!BMR's suspensions SB762 sway bar kit is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!

This Part Fits:

Year Make Model Submodel
2019-2020 Ford Mustang Bullitt
2024 Ford Mustang Dark Horse
2024 Ford Mustang Dark Horse Premium
2015-2024 Ford Mustang EcoBoost
2015-2024 Ford Mustang EcoBoost Premium
2015-2024 Ford Mustang GT
2015 Ford Mustang GT 50 Years Limited Edition
2015-2024 Ford Mustang GT Premium
2022-2023 Ford Mustang Mach 1
2015-2020 Ford Mustang Shelby GT350
2016-2020 Ford Mustang Shelby GT350R
2020-2022 Ford Mustang Shelby GT500
2015-2017 Ford Mustang V6
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR's suspensions SB762 rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 22mm DOM steel tubing, the SB762 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB762 attaches to your S550 Mustang with polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing.BMR's suspension designed the SB762 sway bar kit for street performance, autocross, and road race applications. The SB762 rear sway bar gives you a 29-41% increase in rate over the stock bar. The rate increase improves the handling characteristics of your S550 Mustang so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB762 attaches to your Mustang with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings, allowing for more sway bar control, which equals better handling. When performance is a must, rely on BMR's suspension!BMR's suspensions SB762 sway bar kit is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!

This Part Fits:

Year Make Model Submodel
2019-2020 Ford Mustang Bullitt
2024 Ford Mustang Dark Horse
2024 Ford Mustang Dark Horse Premium
2015-2024 Ford Mustang EcoBoost
2015-2024 Ford Mustang EcoBoost Premium
2015-2024 Ford Mustang GT
2015 Ford Mustang GT 50 Years Limited Edition
2015-2024 Ford Mustang GT Premium
2022-2023 Ford Mustang Mach 1
2015-2020 Ford Mustang Shelby GT350
2016-2020 Ford Mustang Shelby GT350R
2020-2022 Ford Mustang Shelby GT500
2015-2017 Ford Mustang V6